The In and Out Detail

For When Your Vehicle Just Needs a Touch-Up

Our Basic Detail Process

Does Your Car Just Need Some TLC?

Our entry level detail is for those who want their cars to be in a better condition, but without spending the money for a full detail. What you’ll get is a thorough vacuum and wipe down of all services. We dress the plastics with a UV protective coating and give your windows a streak free cleaning.

After we are finished with the interior, we move to the exterior. We give your wheels a thorough cleaning, yes even the inside where the brake dust likes to build up. We pre-rinse your vehicle then proceed with a foam bath.

When we are finished washing the outside, we finish off with a spray wax and tire shine. You can opt to upgrade with a premium wax if desired.

This detail is our maintenance detail also.

Our Process

1. Remove Items

Anything that looks personal will be kept for you to sort through. We do ask that you try to remove anything personal and private from the vehicle before we begin.

2. Vacuum

We do a thorough vacuuming, using compressed air and a drill brush to help loosen the debris in the carpet and get debris from tight areas.

3. Clean Plastics and Leather

We give all surfaces a thorough wipe down with our cleaner. This includes your dash area, cup holders, pillars, door seals and leather seats if you have them.

4. Condition

We apply a UV coating to all plastic surfaces. This coating will make your interior shine without leaving behind a greasy feel.

5. Glass

We clean all clear surfaces surfaces. Your windshield, door glass, back glass, rearview mirror, vanity mirrors, gauges and remove any streaks on your infotainment center.

6. Pre Rinse

Next, the outside. We need to remove as much dirt from the paint as we can. We use a lower powered pressure washer to blast away as much dirt as we can.

7. Wheels

We use a variety of brushes to get the face and inner wheel. We also attack the fenders while we are there.

8. Pre Soak

Foaming up your vehicle helps loosen the dirt. As the foam drips off the paint, it carries most of the dirt with it. Plus, we think it looks cool.

9. Mid Rinse

Now that the foam has had time to loosen up the dirt, We rinse off the vehicle again to wash as much away as possible.

10. Hand Wash

We gently was your vehicle with microfiber wash mitts. We use super soft detail brushes to get around emblems and other small areas.

11. Post Wash Rinse

Now that everything has been agitated, its time to rinse again. This will reveal clean paint that was hiding under all that grime.

12. Dry

Blowing off the water gets the majority off, then we come back with a huge microfiber drying towel and pull it across the surface. We do not add any pressure, just the weight of the towel.

13. Clay Bar

Using a detail spray as lubricant, we clay bar your paint to remove all those embedded contaminants. This leaves behind paint that feels as smooth as glass. If your paint feels rough, it probably needs this.

14. Wax

We use a spray wax that last up to one month. You can upgrade to our six month wax if you would like.

15. Dress Tires

Finally, we give the tires a shine. This will not cause sling as the dressing is dry to the touch moments after applying.

16. Checklist

Finally, we go back around the vehicle and looks for areas we may have missed or can improve on and take care of them before presenting the vehicle to you.

Pricing starts at $100

Pricing depends on size and condition of vehicle.